BART – Taking Aim at Noise Pollution

Last year in August, BART announced a design breakthrough hailed as music to our riders’ ears: a small change in the way train wheels contact the rails that our engineers hoped would make a big difference toward reducing noise. By slightly tapering the wheel profile using the latest simulated modeling techniques, we hoped to reduce metal-on-metal contact and its consequences.

Fast forward to today and the results are in: the new, reduced-contact wheel profile has shown as much as a 15 dB decrease in interior noise on the current fleet. 15 fewer decibels may not sound like a big jump, but remember that decibels—like the Richter Scale—are measured logarithmically, not linearly. As shown in the graphic below, a 15 dB decrease is many times quieter than before, and with the new train cars’ micro-plug doors passengers can only expect things to get better.

Currently, 13% of our legacy fleet has been outfitted with the new wheel profile, and we estimate 90% will be converted by the end of 2019. All new Fleet of the Future cars coming off the assembly line will be outfitted with the new profile, bringing much-needed relief to passengers and neighbors who live close to BART lines.

Now with the plan for the wheels taken care of, we’re ready to take things to the next level.

Wheels are only one half of the screech equation. The rails themselves can also be optimized to work with the new profile, reducing noise even further through a program of custom rail grinding.

Currently, we do surface grinds to remove the effects of corrugation—a pattern of wear caused by acceleration or deceleration of the traditional BART train wheels, known to cause unpleasant sounds. The rail optimization plan will take place during maintenance hours overnight over approximately five years. There will be three phases, with six grinding passes per phase over the entire 235-mile system. That’s roughly 4,000 miles of rail grinding between now and 2022, about the same distance as a drive from San Francisco to Chicago and back.

Once finished, passengers can expect to hum along our tracks at comfortable noise levels, no longer having to worry about whether a banshee has been let loose in the tunnels. Plus, as a bonus, the new wheel profile no longer relies on the wheel flange catching the rail to turn around corners. This drastically reduces the amount of wheel and rail erosion, and will stretch the life of our infrastructure by many years. Less maintenance, more uptime: all part of what we’re doing to build a better BART.

About Kevin

Mayor - City of Oakley, Manager of Mainframe Operations and Optimization – USS-POSCO INDUSTRIES, Co-Founder and Board Member - Friends of Oakley A Community Foundation, Commissioner - Contra Costa Transportation Authority, Board Member - Tri Delta Transit, Transplan, San Joaquin Joint Powers Authority and RD 2137, Advisory Board – Opportunity Junction
This entry was posted in BART. Bookmark the permalink.

Leave a Reply

Fill in your details below or click an icon to log in: Logo

You are commenting using your account. Log Out /  Change )

Google photo

You are commenting using your Google account. Log Out /  Change )

Twitter picture

You are commenting using your Twitter account. Log Out /  Change )

Facebook photo

You are commenting using your Facebook account. Log Out /  Change )

Connecting to %s